SPECIFICATIONS

Brand Name: BYSSEA
Origin: Mainland China
Certification: CS
Weight (kg): < 1000kg
Design: Boat Anchor Winch
Material: STEEL

 
 
 
  
 
   
 
    
The Pontoon 35 Anchor Winch allows you to raise and lower your anchor with the press of a button! This winch utilizes an anti-reverse internal clutch to prevent free-spooling. Suitable for applications requiring heavier anchors, up to 35 lbs. Ideal for pontoon boats of all sizes.
 
   
 
  
 
 
 
 

  
 

 Pontoon 35 Specifics
 

 Maximum Anchor Capacity: 30-35 lbs.
 

 Typical Boat Length: up to 22'
 

 Speed up: 65ft/min
 

 Speed down: 70ft/min
 

 Integrated roller davit
 

 Winch Dimensions (LxWxH): 19.5" x 9.75" x 5.75"
 

 Davit Dimensions (LxWxH): Included above
 

  
 

 All Anchor Winch models include:
 

 Assembly hardware and instructions
 

 100' of 0.20" pre-wound braided anchor rope
 

 Automatic resetting circuit breaker
 

 Sealed membrane UP/DOWN switch
 

 10-gauge marine-grade battery wire
 

 Anchor safety chain
 

 2 Year Manufacturer's Warranty
 

  
 

 HOW TO INSTALL PONTOON 35 ANCHOR WINCH
 

  
 

 Protect yourself and others by observing all safety information listed on the instructions.
 

  
 

 Tools Required for Installation
 

 Electric Drill
 

 5/16'' (7.9mm) Drill Bit
 

 Electrical Terminal Crimping Tool
 

 Adjustable Wrench
 

 Phillips Screw Driver
 

  
 

 Materials Required for Installation
 

 Winch and Anchor Roller (included)
 

 Seven 8mm bolts, washers and nuts (included) – Longer bolts may be required if your deck is very thick.
 

 Shackle for anchor attachment (included)
 

 Anchor (not included – up to 30lb. (13.6 kg))
 

 Battery Wire and Circuit Breaker (included)
 

  
 

 INSTALLING ANCHOR WINCH ON BOAT DECK
 

 The anchor winch can be installed on the fore (front) or the aft (rear) of the boat.
 

 Locate anchor roller and winch on deck in desired location. The anchor roller must be located at the edge of the deck and must be extended over the edge to allow the anchor to clear the deck when it is docked in the anchor roller.
 

 Look below the deck and check for any obstructions underneath the desired anchor roller and winch locations. Make sure there is enough space for the rope spool on the winch to be centered on the anchor roller.